Perfectone-net-ware IP 300 User Manual download pdf (Page 37)

IP 300 User Manual

router is configured to use DHCP addressing, the IP phone’s LAN

parameters will automatically be configured as soon as it is connected to

the LAN or router and powered up; 2: use PPPoE mode. Those ADSL

and Cable Modem users please select this item for it is a protocol

especially designed for them. With this system, ADSL ISP automatically

assigns all the required IP parameters to any device connected to it

when the device log on; 3: use modem mode. Those who use IP phone

with modem, please set the value as 3.

set pppid XXX

With iptype set as 2, use this command to set ADSL ID; with iptype set

as 3, use this command to set Modem ID.

set ppppin XXX

With iptype set as 2, use this command to set ADSL pin; with iptype set

as 3, use this command to set Modem pin.

set ip XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set IP address of IP-300 IP

phone.

set subnetmask XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set subnet mask of IP-300 IP

phone.

set router XXX.XXX.XXX.XXX

With iptype set as 0, use this command to set router IP of network with

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 52 53

No comments

Perfectone-net-ware IP 300 User Manual Page 37