Perfectone-net-ware IP 300 User Manual download pdf (Page 9)

IP 300 User Manual

 CONFIGURING THE IP PHONE

This chapter shows you how to configure the IP phone by keypad, web browser and

telnet. It also tells you the meanings of the items you might encounter in the setting

process.

A. Using the Keypad to Configure the IP phone

 Function Keys Introduction: While using keypad and LCD to configure the

setting of IP phone, following keys will be used:

Keys Function Keys Function

Local IP

Enter change

mode

SPK (Speaker)

Enter submenu; confirm

change

Vol+

Turn over menu

backward

Vol-

Turn over menu forward; move

cursor back in change mode

Keypads Modify values Redial

Exit current menu; exit change

mode

Enter setting mode

Without picking up the handset, enter the password of the IP phone by pressing the

number buttons (default password is 1234), and then press , hold the button

until appears. Then enter the password again and press ,

the IP phone will enter the setting mode with shown on the screen.

Configure the Network Settings

What if your network is using DHCP Addressing?

The IP Phone is set at the factory for DHCP IP addressing. If your LAN or router uses

DHCP addressing, follow the DHCP procedure in the flow chart below. If you are using

Static IP addresses, follow the Static IP Address Procedure.

(As the IP Phone is preset as DHCP mode, if you use DHCP addressing, no changes is

needed)

































SPK

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 52 53

Comments to this Manuals

No comments

Perfectone-net-ware IP 300 User Manual Page 9

Comments to this Manuals