Perfectone-net-ware IP 300 User Manual download pdf (Page 50)

IP 300 User Manual

Usage: the system connects to the FTP server auto to get the corresponding

file and deal with it.

Relevant usage: ftp X

X ranged from 0 through 2:

X-0: Connect to FTP Server to get the file of updating program and save it to

the SDRAM of the phone. Then the file can be read by PalmTool. This

operation aims at testing.

X-1: Connect to FTP Server to get the file of updating program and update

program Flash. This operation aims at updating program.

X-2: Connect to FTP Server to get the file of updating dial rules and update

program Flash. This operation aims at updating dial rule.

Note When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too

large or the net speed is too slow, then the process will not be seen in telnet

window. Please be patient. Using ftp command in telnet to get file spends almost

same minutes as getting file using phone. So if nothing is displayed after too long

time, it means that ftp is fail.

Note All the Telnet commands of IP-300 IP phone should be written in low case and the

password is case sensitive.

1 2 ... 45 46 47 48 49 50 51 52 53

No comments

Perfectone-net-ware IP 300 User Manual Page 50